Our shop opens soon. The buying guides and product details are already here.
Bristle dartboard with darts in the treble 20 (illustration)

Dartboards

Bristle dartboard with thin wire spider

  • 451 mm regulation size
  • Sisal bristle
  • Thin wire spider
  • Removable number ring

A regulation bristle dartboard for steel-tip darts: compressed sisal, a thin wire spider fixed without staples in the scoring area, and a removable number ring so you can rotate the board as it wears.

Available soon

This model cannot be ordered yet. We will publish the price and delivery time as soon as it is available.

Questions? Email us
  • Clock pattern 1 to 20 with the 20 at the top, as in the WDF specification
  • Thin wiring with no staples in the scoring area, for fewer bounce-outs
  • Removable number ring, so the board can be rotated to spread wear
  • Fits standard cabinets, surrounds and ring lights

Product description

Made for steel tip

Sisal fibres are packed tightly and stood on end, so a steel point slips between them and the fibres close up again when you pull it out. That is why a bristle board lasts far longer than the cork or paper boards of the past. The thin spider leaves more of each segment free and makes it less likely that a dart hits wire and bounces out.

Provisional product details: we confirm dimensions, materials and what is in the box with the final model before the shop opens.

Hanging and care

Hang the board so the centre of the bull is 1.73 m above the floor and the 20 segment is at the top. Mark the throw line 2.37 m from the face of the board. Keep the board away from radiators, damp walls and direct sun, and never soak it in water. When the area around the 20 starts to wear, take off the number ring, rotate the board by one or more segments and put the ring back with the 20 at the top. Step-by-step help is in How to set up a dartboard at home.

What's in the box

  • Bristle dartboard with number ring
  • Wall bracket and fixings

Specifications

Size 451 mm diameter (regulation)
Material Compressed sisal fibre
Wiring Thin wire spider, no staples in the scoring area
Number ring Removable
For Steel-tip darts
Mounting Centre bracket, bull at 1.73 m from the floor
SKUDR-BOARD-BRISTLE

Questions about this product

Does this board fit a standard cabinet or surround?

Yes. It is made to the regulation 451 mm size that cabinets, surrounds and ring lights are designed around.

How do I rotate the board?

Remove the number ring, turn the board on its bracket so a fresh segment sits at the top, then refit the ring with the 20 at the top again. The scoring stays correct because the numbers are on the ring, not on the board.

Related products